Humidity


Humidity Hygrometer

GE Sensing offers reliable, absolute humidity hygrometers with a combination of features to suit individual needs and budget. In addition, the aluminum oxide moisture probes offer superior sensitivity, speed of response, and calibration stability. The moisture generators are designed to generate precise, repeatable levels of water vapor pressure in a carrier gas stream.


Select a Product

Product Spotlight
Chipcap ChipCap, a next generation relative humidity and temperature sensor
ChipCap provides a simpler, lower cost integrated relative humidity and temperature solution for HVAC, automotive, medical and appliance industries. ChipCap is the only device on the market that offers both digital and analog configurations on a single, 5VDC-powered chip. Its package is highly resistant to chemical vapors and other contaminants and the sensors are precalibrated, offering high interchangeability.
Humidity Sensor G-Cap-U - Capacitive RH Sensor
Ideally suited for high-volume OEM applications, the G-CAP 2 sensor can be used in automotive, data-loggers, consumer appliances, residential HVAC controls, medical instrumentation, among other applications. The sensor is low-cost and polymer capacitive-based. It is ideally suited for high volume applications. Thereby, reducing the time required for final assembly and production calibration. The sensor requires simple, inexpensive circuitry.
Product Spotlight
Optica Hygrometer Optica Hygrometer - The Ideal Choice
The Optica hygrometer, a standard choice for water vapor measurement, simultaneously measures dew point, temperature, and pressure. It also enables you to access the data for remote monitoring applications.
Dew Point Transmitter DewPro MMY31 - Trace Moisture Transmitter
The DewPro MMY 31 is a loop-powered dew point transmitter for tracing the moisture range. It measures dew point temperature in °C or °F. The transmitter includes an aluminum oxide planar sensor element, a stainless steel probe, a weatherproof enclosure, and microprocessor electronics. It is designed to be installed “in-line”. Various mounting hardware such as flange and compression fittings, are available for mounting into a process chamber, process pipe, etc.